UM026704-0816
Establish a Connection with the PC
S3F80QB Development Kit
User Manual
6
When connecting the 10-pin ribbon cable, be sure to use the correct orientation to prevent
damage to the S3 Flash ISP II.
4. With the USB A (male) to Mini-B cable, connect Port P1 on the S3F80QB Develop-
ment Board to a USB port on the development PC to apply power to the Development
Board, as indicated in Figure 5.
After completing the procedure to connect the S3F80QB Development Board to the PC,
the complete setup appears as shown in Figure 6.
Figure 5. The Power Supply Port P1 Connector
Caution:
