UM026704-0816
S3F80QB Development Board
S3F80QB Development Kit
User Manual
13
•
Navigate to
Project
→
Settings
→
Debugger
→
Debug Tool
→
Setup
. Upon click-
ing
Setup
on the Setup USB Communication dialog box, verify that S3FlashIspII is
displayed.
•
Remove and reconnect the ISP II on the USB port of your PC.
•
on page 15 to learn more about the jumper settings for the S3F80QB
Development Board.
S3F80QB Development Board
The purpose of the S3F80QB Development Kit is to provide a set of hardware and soft-
ware tools for the development of hardware and firmware for applications based on the
S3F80QB microcontroller. An image of the S3F80QB Development Board is shown in
Figure 12; a block diagram is shown in Figure 13.
U4 is for factory use only and is intentionally not populated.
Figure 12. The S3F80QB Development Board
Note:
