UM026704-0816
Trouble Shooting Tips
S3F80QB Development Kit
User Manual
12
This Output Checksum message is an example and may not match the actual checksum of
the project for a particular release of the ZDS installation software.
13. To run the application, select
Reset+Go
from the
Debug
menu, as indicated in
Figure 11. As a result, LEDs D7, D8, and D9 will blink in sequence.
Trouble Shooting Tips
The following trouble-shooting tips are useful when starting the S3F80QB Ledblink sam-
ple program.
•
Ensure that the LED indicator on the S3 Flash ISP II lights up upon connecting to the
USB port of your PC.
Figure 11. Select Reset+ Go from the Debug Menu
Note:
