background image

UM026704-0816

Disclaimer

S3F80QB Development Kit

User Manual

ii

DO NOT USE THIS PRODUCT IN LIFE SUPPORT SYSTEMS.

LIFE SUPPORT POLICY

ZILOG’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE 
SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS PRIOR WRITTEN APPROVAL OF 
THE PRESIDENT AND GENERAL COUNSEL OF ZILOG CORPORATION. 

As used herein

Life support devices or systems are devices which (a) are intended for surgical implant into the body, or (b) 
support or sustain life and whose failure to perform when properly used in accordance with instructions for 
use provided in the labeling can be reasonably expected to result in a significant injury to the user. A criti-
cal component is any component in a life support device or system whose failure to perform can be reason-
ably expected to cause the failure of the life support device or system or to affect its safety or effectiveness.

Document Disclaimer

©2016 Zilog, Inc. All rights reserved. Information in this publication concerning the devices, applications, 
or technology described is intended to suggest possible uses and may be superseded. ZILOG, INC. DOES 
NOT ASSUME LIABILITY FOR OR PROVIDE A REPRESENTATION OF ACCURACY OF THE 
INFORMATION, DEVICES, OR TECHNOLOGY DESCRIBED IN THIS DOCUMENT. ZILOG ALSO 
DOES NOT ASSUME LIABILITY FOR INTELLECTUAL PROPERTY INFRINGEMENT RELATED 
IN ANY MANNER TO USE OF INFORMATION, DEVICES, OR TECHNOLOGY DESCRIBED 
HEREIN OR OTHERWISE. The information contained within this document has been verified according 
to the general principles of electrical and mechanical engineering. 

S3 and Z8 are trademarks or registered trademarks of Zilog, Inc. All other product or service names are the 
property of their respective owners.

Warning:

Содержание Zilog S3 Series




























Отзывы: