UM026704-0816
Establish a Connection with the PC
S3F80QB Development Kit
User Manual
4
1. Prior to connecting the S3F80QB Development Board to your development PC,
download ZDS II for S3 Family devices version 5.3.0 (or later) from the
Download-
able Software
category in the
2. When the download is complete, unzip the file to your hard drive. Double-click the
installation file named ZDS II – S3_<version>.exe, and follow the on-screen instruc-
tions.
Establish a Connection with the PC
Observe the following procedure to connect the S3 Flash ISP II and S3F80QB Develop-
ment Board to your PC.
Disconnect or turn off the power to the S3F80QB Development Board before connecting
or disconnecting the S3 Flash ISP II.
1. Connect the Mini-B side of the USB A (male)-to-Mini-B cable to the S3 Flash ISP II.
Connect the other end of this cable to the PC, as shown in Figure 2.
2. Connect the 10p 5x2 ribbon cable to the S3 Flash ISP II, as shown in Figure 3.
Figure 2. Connect the S3 Flash ISP II to the Development PC
Caution:
