Industrial DIN-Rail Version
3 Industrial DIN-Rail Version
3.1 Pin
allocation
The pin allocation for the Industrial DIN-Rail version is shown in Fig. 3-1.
1
2
3
9
8
7
4
5
6
PWR
CAN1
CAN2
SER
CAN1
PWR
RS
232
CAN2
X1
X3
X2
X4
LED
CANbridge
Fig. 3-1: Pin allocation Industrial DIN-Rail version
3.1.1 Voltage
supply
(X1)
The device is supplied with DC voltage of 9V – 36V. The pin allocation is shown
in Table 3-1. The CANbridge is protected against polarity reversal, under-voltage
and over-voltage.
In the event of polarity reversal or under-voltage, it is switched off, with over-
voltage an internal fuse is triggered.
Pin Signal
1 PE
2 PWR
(+)
3 GND
(-)
Table 3-1: Pin allocation Power
Copyright IXXAT Automation GmbH
CANbridge - Manual, V1.4
11