6
Step 1
Rack Mount iBypass 40-10 Switch
The switch is designed to occupy one rack unit height of a standard 19” rack. Do the
following to install the iBypass 40-10 Switch into an equipment rack:
1. Remove the Ear Extenders and screws from the shipping bag.
2. Attach the Long Ear Extender to the switch if you are only mounting one switch
or attach the Short Ear Extender between two switches if you are mounting two
switches. See Figure 3.
3. Slide the switches in place in the rack.
4. Fasten the switches in place at the front panel ears using the included Phillips
screws.
Figure 3 - Attach Ear Extenders for Rack Mount
Long Ear Extender
for one switch
Short Ear Extender
binds two switches
