9
5. At the terminal window prompt, type ssh [email protected]. Enter
password admin
.
The prompt appears.
6. At the prompt, enter admin for the user and admin for the password.
7. Change the password for the admin account by entering the following
command at the prompt:
modify user password admin <new_passwd> <re-enter_passwd>
where <new_passwd> is the new password for the admin account and
<re-enter_passwd> is new password entered again.
8. Go to Configure the IP section and follow the instructions to set a new IP
address.
PC on the same subnet as
iBypass 4x10G switch
Connect Cat 5e cable
from Management port to
PC Ethernet
Figure 5 - PC to Management Port
For more information about using the iBypass 40-10 Switch CLI, enter help to display
command information or see the iBypass 40-10 Switch User Guide for more details.