IWILL P55XB2 Скачать руководство пользователя страница 19 | Manualshive

Страница: 19 / 91

IWILL P55XB2 Скачать руководство пользователя страница 19

19

C

HAPTER 1

Overview

Thank you for purchasing this

P55XB2 Ultra DMA33 Motherboard

. This operation

manual will guide you to proper configure and install. It has an overview of the
engineering design and feature of this board. Also, this manual provides useful
information for your later upgrade or change the configuration. Keep this, for your
future reference.

1.1 Featuress

This  P55XB2  Ultra  DMA  33  motherboard  is  your  best  choice  for  optimized  media
rich  performance  desktop  on  the  Pentium®  level  processor  with  the  new  MMX™
technology.  It  incorported  with  Intel’s  430TX  PCIset  with  I/O  subsystem  that
supports for pentium processor from 75 to 233 MHz with one single jumper to set up
the  frequency  and  512Kbyte  for  2

nd

. Level Cache onboard that well prepare to run

heavy application.

The  concurrent  PCI  (PCI  2.1)  reduces  CPU  latencies  for  smoother  video  and  more
relistic  audio  and  Universal  Serial  Bus  (USB)  technology  makes  Plug  and  Play
peripheral connections a reality.

Run with faster system memory is another plus on this Pentium EIDE Motherboard to
outperform  the  whole  system  performance.  It  equipe  4  of  the  72  pin  SIMM  that
support  both  fast  page  and  EDO  DRAM  also  with    two  of    the  168  pin  DIMM
memory socket that support the new 3.3V, unbuffered Synchonous DRAM.

The  onboard  two  enhance  IDE  channels  support  for  UltraDMA/33  that  support  data
transfer to 33 MBytes which this new technology but is compatible with the existing
ATA-2 IDE specification.

Fully  support  plug  and  play  I/O  that  contain  two  high  speed  serial  ports,  one
ECP/EPP  printer  port,  up  to  2.88  floppy  disk  port,  keyboard  and  real  time  clock  is
used for users to enjoy the plug and play function. This Pentium EIDE motherboard
has designed with AT form factor to improve the easy access memory module, long

«
...
17
18
19
20
21
...
»

Содержание P55XB2




























































































Отзывы:

Нет отзывов