IWILL P4R533, Руководство пользователя, Страница: 57 / 104

4: Installing The Motherboard
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
User’s Manual 4•11
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Module Installation:
All modules insert in the
RIMM sockets in the same
way. The socket retaining
arms should engage the
retaining notches on the
module securely.
Make sure the module is correctly oriented
before inserting it in the socket
Retaining arms
Retaining notches
PC1066 Memory Configuration
You must manually set the RDRAM Bus Frequency set-
ting to the X4 setting in the IWILL Smart Setting section
of the CMOS Setup Utility. This sets the memory clock to
operate at 533MHz with a 533MHz FSB Pentium 4 CPU.
PC800 memory is automatiacally configured to work with
a 400MHz FSB Pentium 4 CPU.
System Memory Recognition
The BIOS will automatically recognize the installed
memory configuration and configure the CMOS Setup
Utility. No other action is required to complete system
memory installation.
Important Note:
You must set the RDRAM
Bus Frequesncy manually
for PC1066 memory.