IWILL P4R533, Руководство пользователя, Страница: 40 / 104

P4R533/P4R533-N Motherboard
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
User’s Manual 3•4
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Jumper JP16: BIOS Flash Protect
The system BIOS and CMOS Setup Utility are stored in
Flash memory on the motherboard, which provides per-
manent storage, but is rewritable, allowing for BIOS up-
dates. Jumper JP16 controls the protection scheme that
prevents accidental damage to or rewriting of the data
stored in Flash memory.
JP16 has three setting options which allow the BIOS to
be protected either by a firmware setting in the “IWILL
Smart Setting” section of the CMOS Setup Utility or by
the jumper’s hardware setting. The firmware setting op-
tion is more convenient, so it is the default setting for
this jumper. The setting options are listed in the table
below.
JP16: BIOS Flash Protect
Setting Function
Short 1-2 Flash protection mode enabled
Short 2-3 Protection mode selected in BIOS CMOS Setup Utility [Default]
Open [Remove Cap] No BIOS Flash Protection