iWeld PANTHER FLOW, Руководство пользователя

Страница: 40 / 48

5.4 Connecting the tube
1 2
Connect the air tube to the respira -
tory system and twist it clockwise to
lock its position.
Connect the other end of the tube
to the headgear in the same way.
Check that the respiratory tube is strongly connected. If the tube is broken, replace it!
! All components must be installed/used in accordance with this manual if the equip
-
ment is to offer the specified protection. If any component is missing, or if anything is
not clear, contact the supplier.
6. BEFORE USE/FITTING
6.1 Air flow test
1 2
Connect the breathing tube to the
turbo unit and twist it clockwise to
lock it.
Insert the flowmeter at the tip of the
tube.
3 4
Press the ON button and maintain
the tube in a vertical position at
eyes’ height.
The air flow is sufficient if the marble
reaches the minimum flow level O.
1. The airflow must be tested before using.
2. If the marble can’t reach the minimum flow level, don’t use the system.
Change the filter or the battery and retest the air flow.
EN-8