iWeld PANTHER FLOW, Руководство пользователя

Страница: 41 / 48

6.2 Air flow alarm test
1 2
Remove the tube from the helmet
and press the ON button.
Cover the air output with your hand
and wait approximately 15 seconds.
If the alarm does not work, please repair or change Respiratory System.
6.3 Fitting
1 2
Pull down the face seal ring and
put on the head top.
Adjust the headgear to suitable
tightness
(push and turn left to loosen, turn
right to tighten)
Make sure the face seal is positioned properly, otherwise, you can’t get sufficient
sealing needed to offer the correct protection factor.
EN-9