iWeld PANTHER FLOW, Руководство пользователя

Страница: 38 / 48

5.2 Installing and charging the battery
1 2
Slide the battery towards the back
of the filtration unit.
Make sure that the battery is locked
in position.
3 4
The battery can be charged on the
filtration unit or separately.
The battery is partially charged when delivered. It must be charged at a
100% (4 bars) before the first use.
It is recommended to charge the batteries at a 100% before each use!
The charger must not be used for anything else than it was designed for.
Do not charge the battery in a potentially explosive area! The charger
must only be used indoors!
The charger regulates the charge automatically, when the battery is fully
charged, it will maintain it at 100% (floating charge).
The charging time is 3 to 4 hours.
The battery will discharge itself after long storage periods. Always charge
the battery if the device was stored for more than 15 days. Once the
battery is new or has been stored for more than 3 months, charge it
and discharge it at least twice in a row to reach the nominal/rated
charge capacity.
Battery charge :
1. Connect the battery to the charger. The connector is above the battery.
2. Connect the charger to the mains.
3. The state of charge is displayed via a red LED on the mains charger.
4. Once the charge is finished, the floating charge becomes active: the red LED
switches off and a green LED switches on.
5. Disconnect the charger from the mains (do not keep the charger plugged to the
mains if it’s not in use).
EN-6