iWeld PANTHER FLOW, Руководство пользователя

Страница: 46 / 48

Error messages Cause Solution
Fault code «E01»
+ “
Warning ” blinks
1. Motor is stuck
2. Motor is damaged
3. Blower structure failure
caused by outer force
4. Circuit failure
Check and remove physi -
cal failure and restart the
system. Return to dealer if
LCD still shows E01
Fault code «E02»
+ “
Warning ” blinks
1. Motor is damaged
2. Motor impeller rubs
blower shell
3. Circuit has excessive
current.
Check and remove physi -
cal failure and restart the
system. Return to dealer if
LCD still shows E02
+ “ Warning ” blinks
+ alarm sound
Low battery Charge the battery
+ “ Warning ” blinks
+ alarm sound
Filter close up
Tube close up Remove obstruction,
change the filter
Clean tube
blinks
+ alarm sound
Battery high temperature Stop working and rest
No air flow, no alarm 1. No power
2. Battery contact dam
-
aged
Charge the battery
Check battery contact
Battery run time is too short 1. Battery is not fully
charged
2. Filter is blocked
3. Battery is damaged
Charge the battery
Remove obstruction,
change filter
Change battery
Air supply to hood smells
unusual.
1. Filter broken
2. Tube broken
3. ADF helmet broken Leave current area imme -
diately.
1. Change filter
2. Change tube
3. Change ADF helmet
Supply insufficient air to
hood
1. Breathing tube broken
off
2. Breathing tube broken
3. Filter is blocked
1. Check tube connection
to hood and Respiratory
system unit
2. change breathing tube
3. Remove obstruction,
change filter
10. TROUBLE SHOOTING
EN-14