iWeld PANTHER FLOW, Руководство пользователя

Страница: 34 / 48

1. INTRODUCTION
Respiratory System is a combined face and breathing protection device for in -
creased safety and comfort during welding. Please read these instructions carefully
before unpacking. For proper use, see User Instructions or contact manufacturers
for help.
THE RESPIRATORY PROTECTION SYSTEM MUST NOT BE USED :
• In a dangerous environment for the user’s health and safety, an environment with
an oxygen level below 17% or containing unknown substances.
• In confined or non ventilated environments such as basement, etc.
• Near flames or thermal radiation.
• In explosion risk zone.
• In a very windy zone.
• If the respiratory protection system stops working: the user must leave the contami
-
nated area immediately.
• If the filter is not installed.
DO NOT allow water or other liquids to enter the impeller chamber, the filter or battery
compartment.
2. APPROVALS
The system complies with the requirements of European Standard:
EN12941:1998+A2:2008 class TH2 P R S L
The Respiratory System is designed to provide a supply of filtered air via a breathing
tube to a welding headpiece. The equipment can be used in environment that
requires a class TH2P breathing protection device. It protects against articulate
contamination.
All components used in Respiratory System must be approved with manufacturer’s
parts, and must be used in accordance with the instructions in this manual.
Notified Body: INSPEC International Limited 56 Leslie Hough Way, Salford, Greater
Manchester, M6 6AJ United Kingdom (Notified body number 0194)
1. The approval is not valid if the product is incorrectly used together with non-ap -
proved parts or components.
2. Only the particle filter and pre-filter can be used together with this system. Filters
from other manufacturers should under no circumstances be used.
EN-2