IWAKI IX-C060 S6 FA-RF, Инструкция по эксплуатации

Страница: 53 / 84

53
Ma
in
te
n
an
c
e
Maintenance
This section describes troubleshooting, maintenance, wear part replace-
ment, exploded views and specifications.
Points to be observed
Observe the following points during maintenance work.
• Follow instructions in this manual for replacement of wear parts. Do not disassemble the
pump beyond the extent of the instructions.
• Always wear protective clothing such as an eye protection, chemical resistant gloves, a
mask and a face shield during disassembly, assembly or maintenance work. The spe-
ci
fi c solution will dictate the degree of protection. Refer to MSDS precautions from the
solution supplier.
• Risk of electrical shock. Be sure to turn off power to stop the pump and related devices
before service is performed.
Before unplugging the pump
Always stop the pump by key operation. And wait for three seconds before unplugging the
pump. Otherwise, the last key operation to stop the pump may not be put in memory. In
this case the pump unintentionally starts to run as powered on, discharging liquid.
NOTE
• We do not assure material suitability in specified application and are not responsible for any failure due to
corrosion or erosion.
• Contact your distributor or a manufacturer of the host machine which our product is built in for repair.
• Be sure to drain chemicals and clean the inside of the pump before return so that a harmful chemical does
not spill out in transit.
Maintenance