background image

5

Sa

fet

y i

nst

ru

cti

on

s

Safety instructions

Read through this section before use. This section describes important 
information for you to prevent personal injury or property damage.

■ Symbols

In this instruction manual, the degree of risk caused by incorrect use is noted with the follow-
ing symbols. Please pay attention to the information associated with the symbols.

Indicates mishandling could lead to a fatal or serious 

accident.

WARNING

A symbol accompanies each precaution, suggesting the use of "Caution", "Prohibited actions" 

or specific "Requirement".

Indicates mishandling could lead to personal injury or prop-

erty damage.

CAUTION

Caution marks

Prohibited marks

Requirement marks

Safety instructions

Prohibited

Electrical

shock

Caution

Do not rework

or alter

Requirement

Wear

protection

Export Restrictions

Technical information contained in this instruction manual might be treated as controlled tech-
nology in your countries, due to agreements in international regime for export control.
Please be reminded that export license/permission could be required when this manual is 
provided, due to export control regulations of your country.

Fire ban

Содержание PDS-H115





























Отзывы: