ManagerIQEasy_UM_9752103002_GB_V3_1
48
6.13 Overview of HMI parameters
The HMI has the following parameters and settings (Depending on the selected user level, more
or fewer parameters and settings may be visible).
Parameter name
Values
Description
Device name
HMI name to be entered by the user. This allows
the HMI to be given a name that is recognisable to
all users.
Machine position/name
User-defined name to indicate where the HMI is
located in the machine.
Device type
IQ Easy
Manager
Manager IQ Easy
Data logging
Off
The data logging is disabled for the system
logging.
On
The data logging is enabled for the system logging.
Logfile refresh time
1 min
For all connected Devices, the measured values
are stored in a log file every specified time
interval. See also parameter “
Log Sensor Peaks
on RemoteI/O
”.
5 min
15 min
30 min
60 min
Language
Duits
Language in which the information is presented on
the screen.
Engels
Frans
Italiaans
Nederlands
Pools
Spaans
Tsjechisch
Zweeds
Date/time
Local time.
Date format
DD-MM-YYYY
Dutch date format.
YYYY/MM/DD
American date format.
DD.MM.YYYY
German date format.
Realtime screen refresh
Off
The HMI screen is only refreshed if changes are
detected. This setting is intended for slower
system controls.
1 s
The HMI screen is refreshed every set time
interval, regardless of whether there have been
changes or not. These settings are intended for
fast system controls.
2 s
3 s
4 s
5 s
Standby/Run access
level
Basic
Set the minimum user level of users who can set
the Machine and/or Devices to the Operation
Mode (Standby/Run).
Advanced
Expert
Advanced password
Setting the password
with which an “
Advanced
”
user can access the system.
Expert password
Setting the password with which an “
Expert
” user
can access the system.
Remote FTP username
Username to be entered for the FTP server.
Remote FTP password
Password to be entered for the FTP server.