[REV. 20200128] OW_TX_BA_830060001_00__INH-02_EN
Orbitalum Tools GmbH
D-78224 Singen www.orbitalum.com
51
TX 38P Operation
eNGLISH
9. OPeRATION
9.1
Description of the weld head
The rotor and thus the electrode holder can rotate unlimited because the connections of the cables remain in a stationary position
through a special current-water-gas transfer.
9.2
Operating elements
START
STOP
GAS
END.-
0-POS
MOTOR
eLeMeNT
FUNcTION
LeD
LED flashes in ready-to-weld state.
LED lights up constantly during the welding process.
START
STOP
Starts the welding process.
• Pressing once: Welding process aborts immediately, rotor is stopped and
the gas post purge time is activated.
• Pressing again: Gas post purge time and cooling are stopped.
GAS
• Pressing once: Function test of the gas and cooling-liquid supply is started.
• Pressing again: Function test is terminated.
In welding mode or in test mode of the welding power supply pressing and
holding of the button can be used to toggle between both modes.
eND.-
0-POS
Pressing and holding: The rotor rotates until it has reached its home position
"0-position".
Pressing once: Welding process aborts through controlled lowering.
After the arc has extinguished, the gas post purge time is activated.
MOTOR
Pressing and holding: Rotor can be moved manually, for example to set up the
electrode or to check the electrode position.
9.3
Setting the welding parameters
X
Set the welding parameters in accordance with the operating instructions of the welding power supply.
