PRODUCT DESCRIPTION
Introduction
Thank you for buying an ITT Flygt pump.
In this Installation Care and Maintenance manual
you will find general information on how to install
and service the pumping unit to give it a long and
reliable life.
Applications
The pumping unit is intended to be used for:
- pumping of ground water
-
lowering the groundwater level with Wellpoint
system (only for version with vacuum pump)
- pumping of raw or clean water
-
pumping heavy, abrasive or saline liquids
- drainage
- dewatering
-
water supply from wells and canals (only for
non-alimentary uses)
-
pumping of liquids and mud with solid parts in
suspension (within the limits of the technical
specifications)
-
transfer of bentonite slurry
WARRANTY
ITT Flygt undertakes to remedy faults in products
sold by ITT Flygt provided:
- that the fault is due to defects in design, materials
or workmanship.
- that the faults are reported to ITT Flygt or ITT Flygt’s
representative during the warranty period.
- that the product is used only under condition
described in the Installation, Care and Maintenance
manual and in applications for which it is intended
- that the monitoring equipment incorporated in the
product is correctly connected and in use.
- that all service and repair work is done by a work
shop ITT Flygt
- that genuine ITT Flygt parts are used.
Hence, the warranty does not cover faults caused
by deficient maintenance, improper installation,
incorrectly executed repair work or normal wear and
tear.
ITT Flygt assumes no liability for either bodily injuries,
material damages or economic losses beyond what
is stated above.
ITT Flygt guarantees that spare parts will be kept for
10 years after that the manufacture of this product
has been discontinued
For further information on applications, contact
your nearest ITT Flygt representative.
Liquid temperature
: max. 70 °C.
Liquid density
: max. 1100 kg/m
3
The pH of the pumped liquid
: 5,5 – 9
4
