The pumping unit must not be
used in places where there is the
danger of explosion and/or fire,
in mines and tunnels and in
places with poor ventilation
unless special precautions are
taken by the user.
The pumping unit must never
be used to treat liquids
intended for human or animal
consumption (alimentary use).
The pumping unit is provided
with a bolt for earth connection
to ensure equipotentiality and
prevent static electricity.
The pumping unit must be
installed in a workplace with
sufficient lighting for the task to
be performed; the lighting must
permit correct identification of
the controls and optical signals
on machine board in addition to
performance of the cleaning,
adjustment and maintenance
operations and topping up of
liquids.
The pumping units equipped with
diesel engine and/or with vacuum
pump are provided with oil vent
pipes. Suitable devices must be
provided to prevent dispersion in
the ground.
Unilateral modification and spare parts
manufacturing
Modifications or changes to the
unit/installation should only be
carried out after consulting ITT
Flygt.
Original spare parts and
accessories authorized by the
manufacturer are essential for
compliance.
The use of other parts can
invalidate any claims for
warranty or compensation.
WARNING!
Dismantiling and re-assembly
If the pump has been used to
pump hazardous media, care
must be taken that, when
draining the leakage, personnel
and environment are not
endangered.
All waste and emissions such
as used oil must be
appropriately disposed of. Oil
spills must be cleaned up and
emissions to the environment
must be reported.
The working area must be kept
in good order at all times.
All government regulations
shall be observed.
WARNING!
3
