ITT Flygt 5150.350, Инструкция по установке, эксплуатации и обслуживанию

Страница: 10 / 48

Transportation and Storage
Transportation guidelines
Precautions
WARNING:
• Stay clear of suspended loads.
• Observe accident prevention regulations in force.
Position and fastening
The pump can be transported either horizontally or vertically. Make sure that the product is securely
fastened during transportation, and cannot roll or fall over.
Lifting
WARNING:
• Crush hazard. The unit and the components can be heavy. Use proper lifting methods and wear steel-
toed shoes at all times.
• Lift and handle the product carefully, using suitable lifting equipment.
• The product must be securely harnessed for lifting and handling. Use eyebolts or lifting lugs if available.
• Always lift the unit by its lifting handle. Never lift the unit by the motor cable or by the hose.
• Do not attach sling ropes to shaft ends.
Lifting equipment
Lifting equipment is always required when handling the pump. It must fulfill the following requirements:
• The minimum height (contact ITT for information) between the lifting hook and the floor must be
sufficient to lift the pump.
• The lifting equipment must be able to hoist the pump straight up and down, preferably without the
need for resetting the lifting hook.
• The lifting equipment must be securely anchored and in good condition.
• The lifting equipment must support weight of the entire assembly and must only be used by
authorized personnel.
• Two sets of lifting equipment must be used to lift the pump for repair work.
• The lifting equipment must be dimensioned to lift the pump with any remaining pumped media in it.
• The lifting equipment must not be oversized.
NOTICE:
Oversized lifting equipment could cause damage if the unit should stick when being lifted.
Storage guidelines
Storage location
The product must be stored in a covered and dry location free from heat, dirt, and vibrations.
Transportation and Storage
8 Flygt 5150.350, 5150.360 Installation, Operation, and Maintenance Manual