3.
Remove the preservation agent with cleaning fluid and a cloth or operate
the pump with a cleaning agent.
4.
Dispose of the cleaning agent in accordance with locally applicable regula-
tions.
5.
Check all external elastomers (O-rings, shaft seals) for form elasticity and
replace if necessary.
6.
Following storage periods exceeding 3 months: Drain preservative oil from
the transmission casing then fill with lubricating oil (
).
7.
Following storage periods exceeding 3 months: Remove the sealing plugs
from the transmission casing and insert ventilation filter.
8.
Due to the high degree of air humidity and temperature varia-
tions condensate collects, which is not visible beneath the oil.
In the case of drive-side oil lubrication of the bearings, fully drain oil from
the hollow spaces of the bearings and replace with new oil.
Transport and storage
25
Type SLH-4U
0
3
/20
20
JP Rev. 1
