The pump may pose a risk to the environment due to:
n
Unprofessional handling,
n
Operating substances (pumped media, lubricants, motor oil, etc.),
n
Gas emissions,
n
Noise emissions,
n
Risk of fire.
Damage to the pump may arise due to:
n
Unprofessional handling,
n
Overloading,
n
Overheating,
n
Oil level in the synchronisation transmission being too high/low,
n
Failure to adhere to operating and maintenance specifications,
n
Unsuitable operating materials.
Restrictions to the performance or functionality of the pump may arise due to:
n
An ambient temperature of less than -10 °C or more than +40 °C,
n
The dimensioning of the upstream pipe network dependent on the operating
mode.
2.4 Safety instructions
2.4.1 Product safety
The pump has been constructed in accordance with the state-of-the-art and rec-
ognised safety-relevant regulations. Nevertheless, usage of the system can lead
to a risk to life and limb for the user or third-parties as well as adverse effects to
the pump and other tangible assets.
n
Only have pump specialists operate the pump.
n
Observe information contained in the operating manual regarding transporta-
tion, storage, installation, commissioning, operation, maintenance and filling
the pump.
n
Install, commission, operate, fill and maintain the pump professionally.
n
Only use the pump if it is in a technically optimal condition and ensure it is
operated in accordance with the regulations and in a safety and risk-aware
manner in accordance with this manual.
n
Keep this manual and all supplied documents in a complete and legible con-
dition and store so that personnel have them available at all times.
n
Information attached to the pump must be kept complete and legible at all
times.
n
Refrain from any mode of operation that could lead to a risk to personnel or
third-parties.
n
Only operate the pump if its safety equipment is operational.
n
Never operate the pump against a closed or partially closed valve in the
outlet line. Never throttle the outlet side!
n
In the event of safety-relevant faults, immediately shut the pump down and
arrange to have the fault rectified by an authorised person.
n
Maintain all statutory or other safety and accident prevention regulations as
well as relevant standards and guidelines applicable in the country of opera-
tion in addition to the overall documentation provided here.
n
Unauthorised modifications, manipulation or changes to the pump (changes
to the drive relationships, e.g. capacity and speed) are not permitted.
Always observe the following informa-
tion:
Safety
12
Type SLH-4U
0
3
/20
20
JP Rev. 1
