Vehicle Adapter
The Vehicle Adapter is an optional device that supplies power from the vehicle battery to operate the computer and
charge the battery installed in the unit. It typically connects to the vehicle battery using the cigarette lighter socket.
To prevent possible damage to the battery, the system will not allow the battery to charge at extreme temperatures. Be
aware of the following charging characteristics, especially if the computer is left unattended in a closed vehicle.
To connect the vehicle adapter
1. Insert the vehicle adapter’s power cord into the power port on the back of the computer.
2. Insert the cigarette lighter adapter into the vehicle’s cigarette lighter socket, turning it slightly to make a good
connection.
The power light illuminates to indicate that current is reaching the vehicle adapter. When you connect the vehicle
adapter, it automatically begins charging the computer’s battery. At moderate temperatures, around 21°C (70ºF),
the battery will be fully charged in approximately four to five hours. However, under extremely cold or hot
temperatures, or if the system is on, it will take longer to charge the battery (up to 16 hours).
72_0103_003
10 December 2002
© 2002 Itronix Corporation. All rights reserved.
Vehicle Cradle
The vehicle cradle is a vehicle-based docking station designed to safely secure the computer in the vehicle. A standard
key lock located on the front of the cradle locks the computer onto the cradle for security purposes. You can use the
vehicle cradle to:
Charge batteries
Communicate with other devices
Automatically connect to an external RF
antenna
Temperature
Charging Activity
<5°C (<41°F)
Battery will not charge
>50°C (<122°F)
Battery will not charge
GoBook II™ Help
Page 49 of 74
GoBook II Help
9/30/2003
file://C:\Documents%20and%20Settings\harwoodm.ITRXNT1\Local%20Settings\Temp\~hhDDD5.htm