72_0103_003
10 December 2002
Field
Setting
Function
Bootup
Sequence
C; A;
CDROM
Use this field to set the devices from which the system should boot in order of
priority. The default value is C; A; CDROM,. This means the computer will
attempt to boot from the hard disk drive (HDD), then the floppy disk drive (FDD),
then the CD-ROM.
A; C;
CDROM
the computer will boot from the FDD, then the HDD, then the CD-ROM. The
BIOS will auto detect a floppy disk in boot device A:
CDROM;
A; C;
The computer will boot from the CD-ROM, then the FDD, then the HDD.
S.M.A.R.T.
for Hard
Disabled
Enabled
The S.M.A.R.T. (Self-Monitoring, Analysis, and Disks Reporting Technology)
system is a diagnostics technology that monitors and predicts device performance.
The disk drive software monitors the internal performance of the motors, media,
heads, and electronics of the drive. Only S.M.A.R.T. Hard Disks are supported.
The default is Enabled.
Bootup Num-
Lock
Off
On
Use this field to initially disable the Num-Lock feature of the internal keyboard
when the GoBook II starts The default is Off.
Display
Expansion
Mode
Enabled
Disabled
If you are using DOS or a 640 x 480 resolution to run windows, the display will not
fill the entire screen. Enable this mode to expand the display to the entire screen.
Password
Check
Setup
The default value is Setup, which specifies that a password is only required to enter
the Setup Utility.
Always
If Always is selected, the password is required when the system is booted up or
resuming from a suspend-to-disk.
Page 40 of 74
GoBook II Help
9/30/2003
file://C:\Documents%20and%20Settings\harwoodm.ITRXNT1\Local%20Settings\Temp\~hhDDD5.htm
