3
Installing Mobile Collection Components
The MC3 and MC3Lite Mobile Collectors are two versions of the Mobile Collection system for
electric, gas, water, and other providers. They offer advanced radio technology for unsurpassed
performance, along with a sophisticated mapping application utilizing GPS technology that
provides a visual indication of endpoint location. This section provides directions on installing the
components of the Mobile Collection system.
Pre-Installation Requirements
Before installing the Mobile Collection system components as outlined in this document, be sure
that the following pre-installation requirements are complete:
■
The Mobile Collection vehicle is prepared following the information in the
.
■
If using the pedestal option, ensure that you have already ordered and installed the pedestal
base per the manufacturer's installation instructions for your vehicle.
Note:
A variety of bases (not included in the Mobile Collection installation package) are available for
use with the connector to address specific characteristics of different vehicle makes and models.
For details, contact any of the following:
■
Gamber-Johnson at www.gamberjohnson.com
■
Havis Products at customers.havis.com
■
Ram Mounting Systems at www.rammount.com.
Itron has no liability or obligation due to an incorrect installation or any installation that does not
follow the procedures included in this document. Itron is also not liable for any third-party equipment
installed by the customer.
Caution:
Itron strongly recommends disabling the passenger-side air bag when the
Mobile Collection system is installed. The force of the air bag deploying can damage
the laptop, radio, or other components of the system.
Danger!
Install the Mobile Collection system in the vehicle as described in this
document and those listed above. Failure to do so could lead to injury or death from
unsecured components during a collision.
07 May 2020
815-0207-00 REV 000
Itron, Inc. Page 15 of 44