2
Vehicle Preparation
When you use a vehicle with Mobile Collection, there are specific changes to the vehicle that are
required to accommodate the antenna and power. This section provides information on how to
perform those changes.
Warning!
The following procedures must be performed by a qualified professional
installer with the appropriate tools, knowledge, and experience to ensure safe
installation in accordance with these instructions and all applicable safety standards.
Installation by unqualified personnel voids all warranties for the installed products and
associated components, and may subject the installer, operator, or others to
hazardous conditions leading to injury or death.
Tools and Materials Needed
You need the following tools and materials to prepare a vehicle for the Mobile Collection system.
Tools
Materials
Drill and drill bit set
DC power supply cable
De-burring file
Integrated antenna package
Crescent wrench
Permanent antenna mounting
package
Pliers
Silicone sealant
Cutting, stripping, and crimping tools for 12V wire and coax
cable
Vehicle Preparation Tasks
Vehicle preparation includes the following tasks. Perform the tasks in the order presented.
Task
Action
See...
1
Install the power supply cable.
Installing the Power Supply Cable on
page 11
2
Install the integrated antenna. This is broken into
sub-tasks.
Installing the Integrated Antenna on
page 12
07 May 2020
815-0207-00 REV 000
Itron, Inc. Page 10 of 44