Itm ITM 800, Инструкция по эксплуатации

Страница: 100 / 118

Maintenance and adjustment 94
4
Instrument lights and warning
lights (Figs. 71 and 72)
The instrument panel lights are acces-
sible by removing the two side panels. It
will be necessary to release the instrument
panel and gently pull it rearward to gain ac-
cess as follows:
1. Remove the instrument panel side cov-
ers.
2. Remove the two bolts (1) and up cover
plate (2).
Fig.71:
1
2
3
5
4
3. Remove the two side screws (3), slack-
en the two top nuts (4).
4. Ease the instrument panel (5) up and
to the rear.
5. Turn the failed bulb holder anti-clock-
wise and remove it from the panel.
6. The instrument panel illumination
lights have replaceable capless bulbs.
Lights ‘A’ Instrument panel illumina-
tion lights
Lights ‘B’ Warning lights
Light ‘C’ Spare warning light
7. Fit a new bulb in its holder, if applica-
ble, replace the the bulb holder into the
instrument panel and turn to secure.
8. Replace the instrument panel and cov-
ers.
Fig. 72:
B
A
1
Caution
When replacing a failed bulb in the
instrument panel never leave the bulb
hole open. Always put in a new bulb im-
mediately, and if using the spare, blank
off the spare hole with the old bulb or
with adhesive tape until another spare
bulb is obtained.
Rocker switch bulbs (Figs. 73 and
74)
Fig. 73:
1
3
2
The rocker switches are internally illu-