Itm ITM 800, Инструкция по эксплуатации

Страница: 53 / 118

Tractor operation
47
3
Attaching and detaching an im-
plement:
Fig. 22:
3
2
1
4
5
Five types of lower link ends (Fig. 22)
can be fitted to these tractors.
1. Interchangeable ball ends.
2. Fixed ball ends.
3. Wrist action ball ends.
4. Hook type ball ends.
5. Telescopic ball ends.
In this tractor, lower links have fixed
ball ends (2, Fig.22).
Attaching an implement
Warning
If two people are involved in attaching
an implement, great care must be taken.
When making any adjustment to the
hydraulic lift system, the person in the
area of the linkage must stand clear.
1. Place the draft control lever in the fully
raised position.
2. Lower the links using position control,
back the tractor up to the implement,
raise the lower links so that they are
in line with the pins on the implement.
If necessary align the right hand link
using the levelling adjuster.
3. Apply the parking brake before dis-
mounting from the tractor.
4. Fit the left hand lower link first and
secure with a linch pin. Small up and
down adjustments of the lower links
can be made with the remote position
control lever on the right-hand rear
fender.
Note
The Remote Position Control lever is
connected to the Position Control on the
tractor. The movement of the lower link
is proportional to the amount the Remote
Position Control lever is moved. Small
movement of the control lever results in
a small movement of the lower link.
Warning
Stand clear of the implement when
using the remote position control lever.
5. Attach the right-hand lower link to the
implement. Use the levelling lever if
necessary to adjust the height of the
link, then fit the linch pin.
6. Attach the top link to one of the three
hitch points on the tractor.
Using a high hitch point increases
the sensitivity of the hydraulic system.
It also reduces the ground clearance
during transport and the degree of
control, which can cause uneven depth
control.