Itm ITM 800, Инструкция по эксплуатации

Страница: 56 / 118

Tractor operation 50
3
Position Height
A 168 mm
B 268 mm
C 70 mm
D 170 mm
3. Refit the drawbar.
Drawbar lateral swing (Fig. 27 and
28)
Fig. 27:
3
1
2
The drawbar may be fixed in any one
of five positions for normal duty drawbars,
or in any of three positions for heavy duty
drawbars; or allowed to swing the full
width of the frame. The maximum lateral
swing is 240 mm (9.5 in) for normal duty,
194 mm (7.6 in) for heavy duty.
To change the position of the drawbar
(Fig. 27):
1. Remove the four ’R’ clips (1).
2. Remove the two limit pins (2).
3. Reposition the drawbar (3) and refit
the pins and ’R’ clips, or leave it free
to swing. Store the pins and ’R’ clips
in the tool box when not in use.
Drawbar off-set when in the centre
hole (Fig. 28)
Position Normal duty Heavy duty
A 120 mm -
B 240 mm 194 mm
Fig. 28:
Allow the drawbar to swing when pull-
ing ground engaging equipment which does
not require accurate positioning. This will
make steering and turning easier.
Fix the position of the drawbar when
pulling equipment which requires accurate
positioning and transporting equipment.
Front mounted weight frame
(Fig. 29)
The front mounted weight frame is
bolted to the front support casting. A
maximum of eight 45 kg or 27 kg (100
or 60 lb) weights can be fitted. A towing
hitch hole and pin are provided in the open
centre of the frame.
Fig.29: Front mounted weights.