Safety notes for electrical drives and controllers
Page 17
2.2
General notes
In case of damage resulting from non-compliance with the safety notes in this manual, item Industrietechnik GmbH will not
assume any liability.
Prior to the initial use you must read the
Safety notes for electrical drives and controllers
and
chapter 8.11 Notes on safe and EMC-compliant installation
If the documentation in the language at hand is not understood accurately, please contact and inform your supplier.
Sound and safe operation of the servo positioning controller requires proper and professional transportation, storage,
mechanical installation, and project planning – with a consideration of the risks as well as the protective and emergency
measures – plus the proper and professional electrical installation, operation, and maintenance of the devices.
Only trained and qualified personnel is authorised to handle electrical devices and systems:
TRAINED AND QUALIFIED PERSONNEL
in the sense of this product manual or the safety notes on the product itself are persons who are sufficiently familiar with the
project, the setup, assembly, commissioning and operation of the product as well as all warnings and precautions as per the
instructions in this manual and who are sufficiently qualified in their field of expertise:
Education and instruction concerning the standards and accident prevention regulations for the application, or authorisation to
switch devices/systems on and off and to ground them as per the standards of safety engineering and to efficiently label them
as per the job demands.
Education and instruction as per the standards of safety engineering regarding the maintenance and use of adequate safety
equipment.
First aid training.
The following notes must be read prior to the initial operation of the system to prevent personal injuries and/or property
damages:
These safety notes must be complied with at all times.
Do not try to install or commission the servo positioning controller before carefully reading all safety notes for
electrical drives and controllers contained in this document. These safety instructions and all other user notes
must be read prior to any work with the servo positioning controller.
In case you do not have any user notes for the servo positioning controller, please contact your sales
representative. Immediately demand these documents to be sent to the person responsible for the safe
operation of the servo positioning controller.
If you sell, rent and/or otherwise make this device available to others, these safety notes must also be
included.
The user must not open the servo positioning controller for safety and warranty reasons.
