iTD aCart Compact, Руководство по эксплуатации

Страница: 15 / 603

10
carrier system and check wether all the parts you have ordered have been included in the
consignment.
2.2 Loading
Place the uni-cart, vexio-cart, pro-cart, duo-cart, compact-cart, classic-cart or endo-cart carrier
system on a level, horizontal surface. Place the appliances in the cart taking into consideration
the loading sequences. Loading and assembly may only be effected if the cart is separated from
current. We recommend the optional accessory (e. g. tension belt) to be applied for the safety of
each appliance.
The maximum loading is specified in section 10. If the tilt stability is not adequate, the cart must be
clearly labelled in conformity with the 5° labelling specification.
2.3 Loading sequence
Make sure that all the equipment placed on the uni-cart, pro-cart, duo-cart, compact-cart, classic-
cart or endo-cart carrier system is stowed securely to prevent slipping, tipping, falling down, etc. by
taking appropriate measures (especially also during transport). It is advisable to position all heavy
components on the uni-cart, pro-cart, duo-cart, compact-cart,
classic-cart or endo-cart carrier system using two people. You should take into account the fact
that the centre of gravity changes with the loading.
The cart should be loaded in the following sequence:
•
shelves and drawers from the bottom to top
• support arm system (rigid, traversable, tiltable, height adjustable, single or multiple)
should be burdened last.
The cart should be unloaded in the following sequence:
•
support arm system (rigid, traversable, tiltable, height adjustable, single or multiple) should be
relieved first.
• shelves and drawers should be unloaded from top to bottom.
ASSEMBLY
EN