ITC TEKDOS FP 56-J Series, Оригинальное руководство

Страница: 12 / 28

12
HYDRAULIC INSTALLATION
Installation examples
1
2 Filter. It is important to install a filter (150 micron) in the suction pipe.
4 Agitator
5 Make sure to collect any liquid leakage from the cylinder’s vent/drain hole
in a proper container.
6 Prime valve / drain valve
7 Safety relief valve.Install a safety valve in a derivation as near as possible
from the pump, in order to protect it and the whole installation from possible
over-pressures. This derivation must derive liquid to a safe place.
8 Pulsation dampener
9 Pressure gauge
10
Pressure regulating valve
11
Flowmeter
12
Injection check valve
Avoid suctioning the undiluted particles from the bottom of the tank.
4
h
8 9 10 11
1 2 5
6
7
12
12
HYDRAULIC INSTALLATION
Installation examples
1
2 Filter. It is important to install a filter (150 micron) in the suction pipe.
4 Agitator
5 Make sure to collect any liquid leakage from the cylinder’s vent/drain hole
in a proper container.
6 Prime valve / drain valve
7 Safety relief valve.Install a safety valve in a derivation as near as possible
from the pump, in order to protect it and the whole installation from possible
over-pressures. This derivation must derive liquid to a safe place.
8 Pulsation dampener
9 Pressure gauge
10
Pressure regulating valve
11
Flowmeter
12
Injection check valve
Avoid suctioning the undiluted particles from the bottom of the tank.
4
h
8 9 10 11
1 2 5
6
7
12