ITC TEKDOS FP 56-J Series Скачать руководство пользователя

Страница: 26 / 28

I.T.C. S.L.

Warrants the product specified in this document for a period of 1

year from the purchase date. This warranty obligation is limited to the free

replacement of the damaged parts due to any material or manufacture

defect. This warranty does not include periodic maintenance and damage

resulting from misuse.

The equipment must be sent to

I.T.C. S.L

. Service Center with prepaid

transport charges, and will be sent back with transport charges for

customer’s account.

The warranty document with sales date and shop stamp, or an invoice

copy must be sent with the equipment.

Sales date and shop stamp

SERIAL #

MODEL

EC CONFORMITY DECLARATION

Declares that all models TEKDOS FP products, identified by a serial number and

year of manufacture, strictly fulfill 2006/042/CE and low voltages directives

D2006/95/CE, as long as installation, use and maintenance are carried out

following the prevailing regulation and following the instructions contained in the

handbook.

Antón Planas

Manager

I.T.C. S.L.

Warrants the product specified in this document for a period of 1

year from the purchase date. This warranty obligation is limited to the free

replacement of the damaged parts due to any material or manufacture

defect. This warranty does not include periodic maintenance and damage

resulting from misuse.

The equipment must be sent to

I.T.C. S.L

. Service Center with prepaid

transport charges, and will be sent back with transport charges for

customer’s account.

The warranty document with sales date and shop stamp, or an invoice

copy must be sent with the equipment.

Sales date and shop stamp

SERIAL #

MODEL

EC CONFORMITY DECLARATION

I.T.C S.L..

Mar Adriàtic, 1

Polígono Torre del Rector

08130 Santa Perpètua de Mogoda

Declares that all models TEKDOS FP products, identified by a serial number and

year of manufacture, strictly fulfill 2006/042/CE and low voltages directives

D2006/95/CE, as long as installation, use and maintenance are carried out

following the prevailing regulation and following the instructions contained in the

handbook.

Antón Planas

Manager

I.T.C S.L..

Vallès, 26

Polígono Industrial Can Bernades-Subirà

08130 Santa Perpètua de Mogoda

Содержание TEKDOS FP 56-J Series





























Результаты поиска

Содержание TEKDOS FP 56-J Series

Отзывы:

Похожие инструкции для TEKDOS FP 56-J Series

Бренды по названию

Популярные бренды

ITC TEKDOS FP 56-J Series, Оригинальное руководство

Результаты поиска

Содержание TEKDOS FP 56-J Series

Отзывы:

Похожие инструкции для TEKDOS FP 56-J Series

Бренды по названию

Популярные бренды