![Itamar Medical EndoPAT 2000 Скачать руководство пользователя страница 49](http://html1.mh-extra.com/html/itamar-medical/endopat-2000/endopat-2000_operation-manual_2094886049.webp)
Itamar Medical Ltd.
Endo
PAT
TM
x Device
43
Operation Manual
5
Preparing for a Study
5.1
Preparing the System for a Study
Accessories that are required beside the EndoPAT
TM
x system:
A set of two PAT probes and anchors
Blood pressure cuff (capable of sustaining high pressures for 5 minutes)
Adhesive tape
Pair of arm supports
WARNING
Inspect the system, cables and accessories for mechanical
damage.
The use damaged equipment may impact patient and operator
safety and system performance.
Switch on the computer and the EndoPAT
TM
x device. Launch the EndoPAT
TM
x software
and login to the system.
5.2
Connecting the PAT™ Probe
Connect two new probes by inserting the connector tab into each probe slit (see Figure 37)
and pressing the connector down onto the probe until the tab of the probe clicks into place
(see Figure 38).
To remove probes, press the tab (clip) marked by the arrow in Figure 39, and pull the
connector away from the probe (Figure 40). Used probes should be disposed-properly.
Figure 37 - Inserting into slit
Figure 38 - Clicking in