Italkero faro, Установка и послепродажное обслуживание

Страница: 31 / 40

Regulation min pressure
Proceed to the minimum pressure regulation after
that you regulated the max pressure!
To make a regulation operate on the screw that is on
the modulator body (4).
Rotating the regulator screw (3) clockwise the pres-
sure decrease, rotating counter clockwise the pres-
sure increases.
Room Thermostat PROBE offsetting
This function permits offsetting the difference
between the temperature read at the point where the
sensitive element of the room temperature probe is
located and the wellness temperature required in the
premises (see USER sect.).
The appliance maintenance is important for the effi-
ciency and the reliability of the radiator. We recom-
mend that Technical Service Assistance perform the
maintenance once a year.
Preliminary operations:
-Disconnect the electrical alimentation taking off the
electrical plug from the apparatus otherwise; place
the wall switch to the “off” position.
-Close the gas tap.
-Wait that the appliance gets cold completely.
Cover clean
The only cleaning that is required by the owner,
involves removing the cover, and wiping it clean the
dust, which may have collected.
Do not put grease or lubricants on any parts of the
appliance.
To clean plastic or painted parts don
ʼ t use any pro-
duct that will cause damage to the apparatus.
It is important that the switch is turned to the “off” posi-
tion on the control penal. Position the wall switch on off.
Wait that the appliance gets cold completely
Do not allow water or any other liquid to be applied
directly to the cover, uses dampened clothes to do
the operation that you want.
Do not allow liquids on the cover or, on other parts of
the appliance trying avoiding damages.
Internal clean
For the correct disassembly and assembly see in the
relative section.
Burner clean out
If you want a good burner clean, especially if the
appliance has been working in dirty.
Places, or it didn
ʼ t work at all, use the compressor to
ON
OFF
APPLIANCE CLEAN OUT
31
CUSTOMER SERVICE
ORDINARY MAINTENANCE