Italkero faro, Установка и послепродажное обслуживание

Страница: 26 / 40

The appliance is furnished and preset for the gas
function (G 20) and regulated in factory.
Note: the appliance can also be requested with the
GPL gas function.
First things to do before you start the appliance
check:
- If the appliance is preset for the right gas
- The gas connection is correctly realized and the
gas switch is opened.
- The electrical connections are properly done.
Remember it is also important to realize a good
ground connection and to respect the neutral
phase.
During the first starting, you might verify vapour
and irritating smells not dangerous. To avoid
these discomfort we advice to aerate the place.
26
INSTALLER
Check on the technical label for the kind of gas that
the appliance uses.
Use the proper gas tubes and pipe fitting. The
etching under the appliance is a 3/8" M UNI ISO
7/1.
When the gas alimentation, is on the right side
of the appliance for eventuating any problems
use a nipples.
After the gas connection is done, do the first
seal tests.
PRELIMINARY OPERATIONS
GAS CONNECTION
A
B