Italkero faro, Установка и послепродажное обслуживание

Страница: 27 / 40

After performing all the preparation operations for ini-
tial start-up, to start the appliance:
- make sure the fuel tap is open;
- fit the plug in the socket on the appliance;
- move the master switch (if fitted) to "on" or fit the
power plug in the wall socket;
- press the On/Off key (see User section) to switch
on the appliance;
- set the room thermostat at a high value to reduce
heating time;
After startup, the appliance runs until it reaches the
set room temperature.
In case of malfunctions in startup procedure or ope-
ration, the appliance STOPS and the relevant
unblock signal lights up on the display. Reset the
appliance by keeping the unblock button pressed.
Wait until the startup procedure is completed and the
operation signal lights up.
- When the appliance is running, set the clock and
the timer for automatic operation (see User section).
In case of any malfunctions in the control unit,
RESET as follows:
a) press the RESET button as shown in the illustra-
tion.
b) connect and disconnect the plug from the socket
or move the master switch to “off” and then to “on”.
FIRST SERVICE START
27
CUSTOMER SERVICE
A
B
ON