96
English/ Chapter 13
1 The wireless network adapter fails to search out wireless signals
from ISY Wireless Range Extender.
When ISY Wireless Range Extender that is in the Client mode or in the
Reaper mode but disconnected to the uplink AP does not support
wireless client access and can be connected to through an Ethernet
cable only. If the problem persists, causes may be that ISY Wireless
Range Extender is far distant from the terminal device or obstacles
placed between them block wireless signals. You can position ISY
Wireless Range Extender in a closer distance from the terminal device,
reduce obstacles between them, or add a wireless repeater. In addition,
place microwave ovens, Bluetooth devices, and wireless phones that
interrupt WLAN signals far away from WLAN devices.
2 The wireless network adapter fails to connect to ISY Wireless
Range Extender.
Some early-version wireless network adapters may not support WPA2
authentication. You can set the authentication and encryption to
WPA-AES, WPA-TKIP, or WEP.
3 ISY Wireless Range Extender in the Repeater or Client mode fails
to connect to the uplink AP, for example, the domestic gateway, to
access the Internet, or it frequently gets disconnected from the
Internet.
Check that ISY Wireless Range Extender is in the wireless signal co-
verage of its uplink device. Click Site Survey in the Wireless Client
Function page and check whether ISY Wireless Range Extender can
search out strong wireless signals from the uplink AP
13 Appendix A FAQ
