72
English/ Chapter 09
9.6.2 Remote Management
The remote management function allows you to configure the router
from the WAN through the Web browser. In this way, you can manage the
router on a remote host.
Choose Management Function > Remote Management and the Remote
Management page is displayed.
Turn Remote Management On:
If selected, you can perform remote Web
management for the router from the WAN.
Remote Management Address:
IP address that is used to access the
router from the Internet. The default is http://0.0.0.0:8080. When acces-
sing the router, you need to enter an address in the form of “the WAN IP
address of the “:” + “the port number” in the IE address bar. For
example, if your external address is 10.0.0.123 and the used port number
is 8080, enter 10.0.0.123:8080 in your browser.
Port Number:
The port number for accessing the router through remote
Web management.
Allow Remote Access By:
Set the IP address of the computer on which
remote Web management is carried out to access the router.
Only This Computer:
Only the specified IP address can access the
router.
IP Address Range:
A range of IP addresses on the Internet can access
the router. You need to enter the starting and ending IP addresses to
specify a range.
Everyone:
Everyone on the Internet can access the router. After
finishing settings, click Apply to save the settings.
