74
English/ Chapter 09
9.6.4 SNTP
Choose Management Function > SNTP and the SNTP page is displayed.
SNTP refers to Simple Network Time Protocol. In this page, you can set
time information of your router. It is strongly recommended to set the
correct time on the router first. This ensures proper functioning of log,
site blocking, and schedule because their time settings are based on
time information in this page.
Automatically synchronize with Internet time servers:
If selected
automatic synchronization with the network time server is enabled.
First NTP time server:
Enter the IP address of the primary NTP server.
The NTP server is a network time server that is used to synchronize the
time of computers on the Internet. When you set the first NTP time
server, the router obtains GMT time from the specified NTP server with
priority after it is connected to the Internet.
Second NTP time server:
Enter the IP address of the secondary NTP
server if available.
Current Router Time:
Display the current system time of the router.
Time Zone:
Select the time zone where you are located.
Enable Daylight Saving:
Enable or disable daylight saving time (DST).
Daylight Saving Offset:
Select a proper offset. If it is set to +1:00, 10:00
in the morning in standard time becomes 11:00 in the morning in DST.
Daylight Saving Dates:
Set the starting time and ending time of DST.
After finishing settings, click Apply to save the settings.
