54
English/ Chapter 09
(3) PPPoE
If the ISP provides the user name and password for PPPoE (Point-to-
Point Protocol over Ethernet) dialup, select PPPoE.
Login:
Enter the user name for PPPoE dialup provided by the ISP.
Password:
Enter the password for PPPoE dialup provided by the ISP.
Service Name:
If several PPPoE servers are available, specify one in this
field.
Connection Mode:
Always On:
If you select it, the system automatically establishes a
connection. If ISY Wireless Range Extender is disconnected from the
network because of external factors when you are using the
Internet access service, the system attempts connection in an
interval of the specified time (for example, 10 seconds) until the
connection is established. If you pay for Internet access monthly, we
recommend you to use this connection mode.
Dial On Demand:
If you select it, the system automatically establi-
shes a connection when a network access request from the LAN is
received. If no network access request is sent from the LAN within
the specified time of Idle Timeout, the system automatically
interrupts the connection. If you pay for Internet access by time, you
are recommended to use this connection mode, which effectively
saves the expense of Internet access.
Manually Connect:
If you select it, you need to manually set dialup
connection after startup.
Idle Timeout:
If the system does not detect any Internet access
behavior within the specified time of Idle Timeout, the system interrupts
the Internet connection.
Domain Name Server (DNS) Address:
Select Use These DNS Servers if
you know that your ISP does not automatically transmit DNS addresses
to the router during login. And enter the IP address of your ISP’s primary
DNS server. Enter a secondary DNS server address if available.
MTU Size:
Set the maximum transmission unit. The default value is
recommended.
Router MAC Address:
See descriptions on setting Router MAC Address
for DHCP. After finishing settings, click Apply to save the settings.
