81
Cleaning the Air Cleaner Element
5. Push the element back into position in the air
cleaner body.
6. Install the air cleaner cover. Line up the notch
on the left side of the body with the claw on
the cover. Secure the cover in position by
fastening the 3 clips.
Choose one of the following cleaning methods depending on
how the element has become dirty.
1.
When dry dust has adhered to the element ;
a) Blow compressed air at a pressure of up to 690
kPa
against the inside of the
element while turning it to remove the dust.
b) Check to see if the element has been damaged or become thin in places.
2.
When the element has become blackened by oily smoke or soot ;
a) Soak the element in a mixture of water and neutral detergent for about 30
minutes.
b) Remove the element from the detergent solution and rinse well using tap water.
c) After cleaning, allow the element to dry naturally in a well-ventilated place.
Содержание NOVOULTRA E6 2019
