ISPA PORTABLE SPA 2009, Руководство пользователя

Страница: 12 / 48

2009 iSpa Owner’s Manual
LTR20091084, Rev. A
Pr
eparing f
or
Your Ne
w P
or
tab
le Spa
10
Once the spa has been placed on an approved sur- 1.
face and has been correctly wired by a licensed
electrician, inspect all plumbing connections in the
equipment area of your spa. Ensure that these con-
nections are secure and that they did not loosen
during shipment.
If equipped, open all gate valves in the equipment
2.
area. Before operating the spa, these valves must
be in the up or “open” position.
Never fill your spa with
soft water.
Soft water makes it impossible to
maintain the proper water chemistry
and may cause the water to foam, which will ulti-
mately harm the finish of the spa and void your war -
ranty.
VERY IMPORTANT!
Never run the spa with the gate valves
closed or without water circulating for
long periods of time. Be careful not to
over-tighten the plumbing fittings.
Remove the cartridge from filter canister. 3.
Place a garden hose in the filter canister and fill 4.
your spa with regular tap water about six inch-
es from the top.
VERY IMPORTANT!
Always fill the spa through the filter
canister! Failure to do so may cause air
to be trapped in the filtration system
and prevent the pumps from operating
properly.
Filling and Powering Up Your
Portable Spa