ISPA PORTABLE SPA 2009, Руководство пользователя

Страница: 13 / 48

Pr
eparing f
or
Your Ne
w P
or
tab
le Spa
11
Once the water is at the correct level and air is bled, 6.
plug in the spa into a dedicated electrical outlet.
Note: When the power is turned on to the spa,
the controls will perform a diagnostic check for ap-
proximately five minutes. When the diagnostic is
complete, the spa will automatically operate at fil -
ter speed and continue heating until the spa water
temperature reaches the default temperature of
100˚F.
If no water is flowing when the pump is running,
8.
there could be an air pocket at the suction side of
the pump. Shut off power to the spa and loosen
the pump union on the suction side of the pump
to bleed the air. When air is bled, turn power back
on.
Install the pre-soaked filters into the filter canister. 9.
The spa is now ready for use.
Presoak the filters in spa water. 5.
VERY IMPORTANT!
You must presoak the filters before in -
serting them in the filter canister. Dry
filters can allow air into the filtration
system which can cause pump failure.