ISPA PORTABLE SPA 2009, Руководство пользователя

Страница: 29 / 48

Clear
W
ater Plan
27
Testing For: Ideal Range (ppm) Chemicals To Use:
Minimum Maximum To Raise To Lower
Total Alkalinity 80 120 pH-Alkalinity Up pH-Alkaliity Down
Calcium Hardness 150 200 Liquid Hardness Increaser Stain and Scale Defense
pH 7.4 7.6 pH-Alkalinity Up pH-Alkaliity Down
Shocking the Water
In addition to using a chemical sanitizer, you will period -
ically need to shock the water. Shocking the water helps
remove burned-out chemicals, bacteria, and other or-
ganic material from your spa’s water and improves your
sanitizer’s effectiveness.
Do not use chlorinating shock, which will damage your
spa’s jets and pump seals. The only shock you should
use is Oxidizer Shock. It is an easy way to maintain
either chlorine or bromine chemical plans.
For best results use the directions below.
Add one ounce of Oxidizer Shock:
Once a week •
After heavy bather loads •
If water has a strong odor •
Spa must be running with all of the jets on high for 30
minutes with the cover open. If necessary, repeat oxi-
dizer shock in 30 minute intervals.
Using Bromine as a Sanitizer
Bromine is a very effective sanitizer that produces low
chemical odors. Unlike chlorine, it can break down bac-
teria and other impurities to a safe level with a low
burn-out rate.
Bromine is available in both granulated and tablet form.
Use granulated bromine to establish your bromine base.
Use tablets to maintain it. The filter cartridge provided
with your spa has an internal chamber for bromine tab-
lets. Do not use a floater.
When you begin with fresh water, add 2 ounces of bro-
mine. Open all of the jets and run the spa at high speed.
This is your base bromine level as the tablets will take
a while to dissolve.
Add two ounces of Oxidizer Shock. Open all of the jets
and run on high speed with the cover half open for at
least 30 minutes.
Follow the maintenance schedule on page page 36
.