8
3
Installation
3.1
Unpacking and storage
3.1.1
Unpacking
Care should be taken when opening the box containing the flowmeter, any
markings or warnings shown on the packaging should be observed prior to
opening. The following steps should then be taken:
●
Unpack the flowmeter in a dry area;
●
The flowmeter should be handled with care and not left in an area
where it could be subject to physical shocks;
●
If using a knife to remove packaging care should be taken not to dam-
age the flowmeter or cables;
●
The flowmeter package and contents should be checked against the
delivery note supplied and any missing items reported immediately;
●
The flowmeter package and contents should be checked for signs of
damage during transport and any problems reported immediately;
●
The vendor accepts no responsibility for damage or injury caused
during the unpacking of the instrumentation supplied;
●
Excess packing materials should be either recycled or disposed of in
a suitable way.
3.1.2
Storage
If storage is necessary, the flowmeter and sensors should be stored:
●
in a secure location;
●
away from water and harsh environmental conditions;
●
in such a way, as to avoid damage;
●
small items should be kept together in the bags and small plastic
boxes provided to avoid loss.
3.1.3
Identification of components
The following items are typically supplied (please refer to your delivery note
for a detailed description):
●
IFX-P200 hand-held flowmeter
●
Clamp-on sensors (usually one or two pairs depending on pipe sizes
to be measured)
●
Sensor mounting accessories (optional)
●
Coupling component (optional)
●
Measuring tape
●
Operating instructions
