IFX-P200
User Manual
27
Hand-held_Flow_Meter_IFX-P200_EN_2017_July_Rev.01
5
Commissioning
5.1
Menu structure
Main menu
Menu level 1 Menu level 2 Description/settings
Quick Start
Setup Wizard
Sensor type
Indication of sensor type and serial number if au-
tomatically detected, otherwise
select from list ↑↓
K1N,K1L,K1E,K1Ex,K1P,
K4N,K4L,K4E,K4Ex,K4P,
K0, M, Q, Special
Middle (main
displayed)
Units
Select from list where available ↑↓
m/s, f/s, in/s, m3/h, m3/min, m3/s, l/h, l/min, l/s,
USgal/h, USgal/min, USgal/s, bbl/d, bbl/h, bbl/min,
g/s, t/h, kg/h, kg/min, m3, l, Usgal, bbl, g, t, kg, W,
kW, MW, J, kJ, MJ,
Signal dB, noise dB, SNR (dB),
C m/s (sound speed), CU (housing temperature),
K (correction factor), REY (Reynolds number),
SOS, DEN, KIN, SHC (sound speed, density,
kinematic viscosity, Specific Heat Capacity from in-
puts/calculation),
TEMP (specified or measured fluid temperature),
PRESS (specified or measured fluid pressure),
Tin, Tout (inlet and outlet temperature)
Other (Assignable input or calculated value),
Math (Calculated value – see below).
Pipe material
Select from list ↑↓
Stainless steel, Carbon steel, Ductile cast iron,
Grey cast iron, Copper, Lead, PVC, PP, PE, ABS,
Glass, Cement, User (pipe c-speed)
Pipe c-speed
Only if user pipe material selected
500 ... 5000 m/s
Outside diame-
ter
10 ... 3000 mm
Wall thickness 0.5 ... 75 mm
Inner diameter 10….3000 mm
Fluid
Select from list ↑↓
Water, Salt water, Acetone, Alcohol, Ammonia
Carbon Tet (carbon tetrachloride), Ethanol, Ethyl
alcohol, Ethyl ether, Ethylene glycol, Glycol/water
50%, Kerosene, Methanol, Methyl alcohol
Milk, Naphtha, Car oil, Freon R134a, Freon R22
Hydrochloric acid, Sour cream, Sulphuric acid
Toluene, Vinyl chloride
User (kinematic viscosity, density, medium c-
speed)
Kinematic vis-
cosity
Only if user fluid selected
0 ... 30000 mm
2
/s
Density
Only if user fluid selected
100 ... 2000 kg/m
3
Medium c-
speed
Only if user fluid selected
800 ... 3500 m/s
Temperature
-30 ... 300 °C
Liner Material
Select from list ↑↓
None, Epoxy, Rubber, PVDF, PP, Glass, Cement,
User (liner c-speed)
Liner thickness
Only if lining material selected
1.0 ... 99.0 mm
Liner c-speed
Only if lining material selected
500 ... 5000 m/s
Menu structure
